logo alderon flat hollow

ALDERON FLAT HOLLOW

Flat Ceiling Panel – Flat Wall Panel
– Flat Flooring & Barrier

Alderon Flat Hollow are innovative product from PT. Unipack Plasindo. It combines excellent chemical resistant properties, thermal insulation, water tightness, low handling weight; and is easy to install or customized with decorative film laminations.

Alderon Flat Hollow are produced from uPVC material that was developed specifically to increase resistance to UV radiation, and comes with unique design innovations that strengthen and improve its quality.

Excellence of Alderon Flat Hollow

Excellent Chemical Resistant Properties

Excellent Chemical Resistant Properties

Thermal Insulation

Thermal Insulation

Water Tightness

Water Tightness

Low Handling Weight

Low Handling Weight

alderon flat ceiling panel

01

Flat Ceiling

Panel

Alderon Flat Ceiling Panel (FCP) is another innovative product from PT. Unipack Plasindo. It combines excellent chemical resistant properties, thermal insulation, water tightness, low handling weight; and is easy to install or customized with decorative film laminations. In addition, Alderon FCP provides good fire retardant properties which meets internationally accepted standards. Alderon FCP is designed from a unique material formulation and processing in making them lightweight yet sturdy, resulting a durable product ideal for long term use in harsh and demanding industrial applications as well as domestic general purpose applications.

01

Flat Ceiling

Panel

Alderon Flat Ceiling Panel (FCP) is another innovative product from PT. Unipack Plasindo. It combines excellent chemical resistant properties, thermal insulation, water tightness, low handling weight; and is easy to install or customized with decorative film laminations. In addition, Alderon FCP provides good fire retardant properties which meets internationally accepted standards. Alderon FCP is designed from a unique material formulation and processing in making them lightweight yet sturdy, resulting a durable product ideal for long term use in harsh and demanding industrial applications as well as domestic general purpose applications.

alderon flat ceiling panel
alderon flat wall panel

02

Flat Wall

Panel

ALDERON Flat Wall Panel (FWP) is another innovative product from PT. Unipack Plasindo. It combines excellent chemical resistant properties, thermal insulation, water tightness, low handling weight; and is easy to install or customized with decorative film laminations. In addition, Alderon FWP provides good fire retardant properties which meets internationally accepted standards. Properties being self extinguishing without external flame source.

Product Specifications

Effective Width 1000 mm
Weight 5.7 Kg/Lm
Flat Thickness 20 mm

Some examples of Alderon FWP uses

  • Industrial & Commercial building wall panels.
  • Portable partitions panels for temporary rooms.
  • Clean Food & Pharmaceutical factories panels.
  • Emergency housing/building panels.
  • Animal farms insulating & chemical resistant (vs animal waste)wall claddings.

Thermal Properties

Test Method Product Alderon FWP
Thermal Conductivity ASTM E1530-11 0.27 W/mk
Thermal Resistance ASTM E1530-11 7.13E-2 m2k/w
Service Temperature -20 to 60 degree Celcius

 

Alderon FWP being of hollow and triple walled construction is of good thermal (and sound) insulating properties. Above are tested sample data of insulating and conducting properties for comparison with other walls
and panels.

The service temperature range of Alderon FWP is -20°C to 60 °C, greater care should be taken when working with UPVC Sheet at lower temperatures; UPVC is less resistant to impact damage at temperatures below zero
Celsius.

Flammability

Alderon FWP is self-extinguishing without external flame source and conforms with the highest ratings for plastic and composite materials. Under UL94 Flammability Test, Alderon FWP classified as V-0 low flammability.

Physical & Mechanical Properties

Test Method Product Alderon FWP
Tensile Strength at Yield ASTM D-638 30 Mpa
Elongation at Yield ASTM D-638 15%
Hardness ASTM D-2240 79
Modulus of Elasticity in Bending ASTM D-790 750

 

When installing Alderon FWP, horizontal supporting beams should be applied for every 1500 mm – 1800 mm of height and vertical beam for approximately 2000 mm span width.

Please take note that mechanical strength would reduce over time if exposed to sunlight and chemicals, and it is recommended after some years (depending on the location environment) that inspections be carried out
re the structural integrity of the panels.

Corrosion and Chemical Resistance

Test Method Product Alderon FWP
Sulphuric Acid 40% 60 degree Celcius 168 hours ASTM D543-06 No Change
Nitric Acid 40% 60 degree Celcius 168 hours ASTM D543-06 No Change
Ammonia Gas room temperature 168 hours ASTM D543-06 No Change

 

Alderon FWP has good chemical resistance to a wide range of chemicals , acids and bases, especially rubber processing chemicals, paper making chemicals, animal and waste farms methane & ammonia gas/vapour,
fertilizer chemicals, galvanizing fumes etc.

Installation Process

installation alderon flat hollow fwp
Click image to enlarge

 

  • Install the cladding module to the structure using roofing screws.
  • Attach the second cladding module from male to female with the tongue & groove system.
  • Repeat the step to install the next module.
+ Product Specifications

Product Specifications

Effective Width 1000 mm
Weight 5.7 Kg/Lm
Flat Thickness 20 mm

Some examples of Alderon FWP uses

  • Industrial & Commercial building wall panels.
  • Portable partitions panels for temporary rooms.
  • Clean Food & Pharmaceutical factories panels.
  • Emergency housing/building panels.
  • Animal farms insulating & chemical resistant (vs animal waste)wall claddings.
+ Thermal Properties

Thermal Properties

Test Method Product Alderon FWP
Thermal Conductivity ASTM E1530-11 0.27 W/mk
Thermal Resistance ASTM E1530-11 7.13E-2 m2k/w
Service Temperature -20 to 60 degree Celcius

 

Alderon FWP being of hollow and triple walled construction is of good thermal (and sound) insulating properties. Above are tested sample data of insulating and conducting properties for comparison with other walls
and panels.

The service temperature range of Alderon FWP is -20°C to 60 °C, greater care should be taken when working with UPVC Sheet at lower temperatures; UPVC is less resistant to impact damage at temperatures below zero
Celsius.

+ Flammability

Flammability

Alderon FWP is self-extinguishing without external flame source and conforms with the highest ratings for plastic and composite materials. Under UL94 Flammability Test, Alderon FWP classified as V-0 low flammability.

+ Physical & Mechanical Properties

Physical & Mechanical Properties

Test Method Product Alderon FWP
Tensile Strength at Yield ASTM D-638 30 Mpa
Elongation at Yield ASTM D-638 15%
Hardness ASTM D-2240 79
Modulus of Elasticity in Bending ASTM D-790 750

 

When installing Alderon FWP, horizontal supporting beams should be applied for every 1500 mm – 1800 mm of height and vertical beam for approximately 2000 mm span width.

Please take note that mechanical strength would reduce over time if exposed to sunlight and chemicals, and it is recommended after some years (depending on the location environment) that inspections be carried out
re the structural integrity of the panels.

+ Corrosion and Chemical Resistance

Corrosion and Chemical Resistance

Test Method Product Alderon FWP
Sulphuric Acid 40% 60 degree Celcius 168 hours ASTM D543-06 No Change
Nitric Acid 40% 60 degree Celcius 168 hours ASTM D543-06 No Change
Ammonia Gas room temperature 168 hours ASTM D543-06 No Change

 

Alderon FWP has good chemical resistance to a wide range of chemicals , acids and bases, especially rubber processing chemicals, paper making chemicals, animal and waste farms methane & ammonia gas/vapour,
fertilizer chemicals, galvanizing fumes etc.

+ Installation Process

Installation Process

installation alderon flat hollow fwp
Click image to enlarge

 

  • Install the cladding module to the structure using roofing screws.
  • Attach the second cladding module from male to female with the tongue & groove system.
  • Repeat the step to install the next module.
alderon flat flooring barrier

03

Flat Flooring

& Barrier

Alderon Flat Flooring and Barrier (FFB) is another innovative product from PT. Unipack Plasindo. It combines excellent chemical resistant properties, thermal insulation, water tightness, low handling weight; ease of installation and offers superior load bearing strength. In addition, Alderon FFB provides good fire retardant properties which meets internationally accepted standards. Alderon FFB is designed from a unique material formulation and processing in making them lightweight yet sturdy, resulting a durable product ideal for long term use in harsh and demanding industrial applications as well as domestic general purpose applications.

03

Flat Flooring

& Barrier

Alderon Flat Flooring and Barrier (FFB) is another innovative product from PT. Unipack Plasindo. It combines excellent chemical resistant properties, thermal insulation, water tightness, low handling weight; ease of installation and offers superior load bearing strength. In addition, Alderon FFB provides good fire retardant properties which meets internationally accepted standards. Alderon FFB is designed from a unique material formulation and processing in making them lightweight yet sturdy, resulting a durable product ideal for long term use in harsh and demanding industrial applications as well as domestic general purpose applications.

alderon flat flooring barrier
Effective Width 1000 mm
Weight 5.7 Kg/Lm
Flat Thickness 20 mm

Some examples of Alderon FFB uses :

  • Decking panels for Mezzanine flooring.
  • Racking System planks.
  • Portable floor Panel for temporary structures
  • Poultry barns and broiler units flooring.
  • Animal husbandry barrier/wall panels.
Temperature Difference 60⁰C outer side, 33⁰C on inner side

 

Alderon FFB’s unique hollow construction comes with built-in thermal insulation properties, which will help to reduce heat transfer to the living space, and vice versa. The service temperature range of Alderon FFB is -20°C to 60 °C, greater care should be taken when working with Vinyl Sheet at lower temperatures; UPVC is less resistant to impact damage at lower temperature.

Test Method Product Alderon FFB
Tensile Strength at Yield ASTM D-638 30 Mpa
Elongation at Yield ASTM D-638 15%
Hardness ASTM D-2240 79
Modulus of Elasticity in Bending ASTM D-790 750
Crush Test F Max 3281 N
3-Point Bending Test F Max (N)/15 cm Width 1205 N

 

When delivered new Alderon FFB uPVC Floor can be stepped on when installing with supporting steel beam span of around 500 mm. However for safety concern, the installer must evaluate based on above mechanical properties calculation versus weight of workers per area. Please kindly note that mechanical strength would reduce over time and it is not recommended after some years (depending on the location environment) that workers walk beyond beam supports when inspecting or working on Alderon FFB.

Alderon FFB is self-extinguishing without external flame source and conforms with the highest ratings for plastic and composite roofing material. Under UL94 Flammability Test, Alderon FFB classified as V-0 low flammability.

Test Method Product Alderon FFB
Sulphuric Acid 40% 60 degree Celcius 168 hours ASTM D543-06 No Change
Nitric Acid 40% 60 degree Celcius 168 hours ASTM D543-06 No Change
Ammonia Gas room temperature 168 hours ASTM D543-06 No Change
installation alderon flat hollow ffb
Click image to enlarge
cover brosur alderon flat hollow

Alderon Flat Hollow

Get complete information about specifications and features of Alderon Flat Hollow

FOLLOW ALDERON SOCIAL MEDIA
white facebook icon
white instagram icon

GET ALDERON FLAT HOLLOW NOW

  • Simply Fill This Form:

LET'S GET SOCIAL

Want to get our product faster ?

CONTACT US

Alderon

Altira Office Tower 37th Floor
Altira Business Park
Jl. Yos Sudarso Kav. 85
Jakarta 14350 - Indonesia

Phone +6221 2188 2099 / 2001
Fax : +6221 2188 2098 / 2021
Email export-marketing@impack-pratama.com