ALDERON FLAT WALL PANEL
Alderon Flat Wall Panel is an innovative uPVC panel from PT Unipack Plasindo that can serve as a partition. It is designed to be resistant to chemicals, heat‑insulating, leak‑proof, lightweight, easy to install, and able to be covered with decorative finishes.
Excellence of Alderon Flat Wall Panel
Excellent Chemical Resistant Properties
Thermal Insulation
Leak Proof
Low Handling Weight
Flat Wall
Panel
Product Specifications
| Effective Width | 1000 mm |
| Weight | 5.7 Kg/Lm |
| Flat Thickness | 20 mm |
Some examples of Alderon FWP uses
- Industrial & Commercial building wall panels.
- Portable partitions panels for temporary rooms.
- Clean Food & Pharmaceutical factories panels.
- Emergency housing/building panels.
- Animal farms insulating & chemical resistant (vs animal waste)wall claddings.
Thermal Properties
| Test Method | Product Alderon FWP | |
| Thermal Conductivity | ASTM E1530-11 | 0.27 W/mk |
| Thermal Resistance | ASTM E1530-11 | 7.13E-2 m2k/w |
| Service Temperature | -20 to 60 degree Celcius |
Alderon FWP being of hollow and triple walled construction is of good thermal (and sound) insulating properties. Above are tested sample data of insulating and conducting properties for comparison with other walls
and panels.
The service temperature range of Alderon FWP is -20°C to 60 °C, greater care should be taken when working with UPVC Sheet at lower temperatures; UPVC is less resistant to impact damage at temperatures below zero
Celsius.
Flammability
Alderon FWP is self-extinguishing without external flame source and conforms with the highest ratings for plastic and composite materials. Under UL94 Flammability Test, Alderon FWP classified as V-0 low flammability.
Physical & Mechanical Properties
| Test Method | Product Alderon FWP | |
| Tensile Strength at Yield | ASTM D-638 | 30 Mpa |
| Elongation at Yield | ASTM D-638 | 15% |
| Hardness | ASTM D-2240 | 79 |
| Modulus of Elasticity in Bending | ASTM D-790 | 750 |
When installing Alderon FWP, horizontal supporting beams should be applied for every 1500 mm – 1800 mm of height and vertical beam for approximately 2000 mm span width.
Please take note that mechanical strength would reduce over time if exposed to sunlight and chemicals, and it is recommended after some years (depending on the location environment) that inspections be carried out
re the structural integrity of the panels.
Corrosion and Chemical Resistance
| Test Method | Product Alderon FWP | |
| Sulphuric Acid 40% 60 degree Celcius 168 hours | ASTM D543-06 | No Change |
| Nitric Acid 40% 60 degree Celcius 168 hours | ASTM D543-06 | No Change |
| Ammonia Gas room temperature 168 hours | ASTM D543-06 | No Change |
Alderon FWP has good chemical resistance to a wide range of chemicals , acids and bases, especially rubber processing chemicals, paper making chemicals, animal and waste farms methane & ammonia gas/vapour,
fertilizer chemicals, galvanizing fumes etc.
Installation Process
- Install the cladding module to the structure using roofing screws.
- Attach the second cladding module from male to female with the tongue & groove system.
- Repeat the step to install the next module.
Product Specifications
| Effective Width | 1000 mm |
| Weight | 5.7 Kg/Lm |
| Flat Thickness | 20 mm |
Some examples of Alderon FWP uses
- Industrial & Commercial building wall panels.
- Portable partitions panels for temporary rooms.
- Clean Food & Pharmaceutical factories panels.
- Emergency housing/building panels.
- Animal farms insulating & chemical resistant (vs animal waste)wall claddings.
Thermal Properties
| Test Method | Product Alderon FWP | |
| Thermal Conductivity | ASTM E1530-11 | 0.27 W/mk |
| Thermal Resistance | ASTM E1530-11 | 7.13E-2 m2k/w |
| Service Temperature | -20 to 60 degree Celcius |
Alderon FWP being of hollow and triple walled construction is of good thermal (and sound) insulating properties. Above are tested sample data of insulating and conducting properties for comparison with other walls
and panels.
The service temperature range of Alderon FWP is -20°C to 60 °C, greater care should be taken when working with UPVC Sheet at lower temperatures; UPVC is less resistant to impact damage at temperatures below zero
Celsius.
Flammability
Alderon FWP is self-extinguishing without external flame source and conforms with the highest ratings for plastic and composite materials. Under UL94 Flammability Test, Alderon FWP classified as V-0 low flammability.
Physical & Mechanical Properties
| Test Method | Product Alderon FWP | |
| Tensile Strength at Yield | ASTM D-638 | 30 Mpa |
| Elongation at Yield | ASTM D-638 | 15% |
| Hardness | ASTM D-2240 | 79 |
| Modulus of Elasticity in Bending | ASTM D-790 | 750 |
When installing Alderon FWP, horizontal supporting beams should be applied for every 1500 mm – 1800 mm of height and vertical beam for approximately 2000 mm span width.
Please take note that mechanical strength would reduce over time if exposed to sunlight and chemicals, and it is recommended after some years (depending on the location environment) that inspections be carried out
re the structural integrity of the panels.
Corrosion and Chemical Resistance
| Test Method | Product Alderon FWP | |
| Sulphuric Acid 40% 60 degree Celcius 168 hours | ASTM D543-06 | No Change |
| Nitric Acid 40% 60 degree Celcius 168 hours | ASTM D543-06 | No Change |
| Ammonia Gas room temperature 168 hours | ASTM D543-06 | No Change |
Alderon FWP has good chemical resistance to a wide range of chemicals , acids and bases, especially rubber processing chemicals, paper making chemicals, animal and waste farms methane & ammonia gas/vapour,
fertilizer chemicals, galvanizing fumes etc.
Installation Process
- Install the cladding module to the structure using roofing screws.
- Attach the second cladding module from male to female with the tongue & groove system.
- Repeat the step to install the next module.
- + Product Specifications
-
Product Specifications
Effective Width 1000 mm Weight 5.7 Kg/Lm Flat Thickness 20 mm Some examples of Alderon FWP uses
- Industrial & Commercial building wall panels.
- Portable partitions panels for temporary rooms.
- Clean Food & Pharmaceutical factories panels.
- Emergency housing/building panels.
- Animal farms insulating & chemical resistant (vs animal waste)wall claddings.
- + Thermal Properties
-
Thermal Properties
Test Method Product Alderon FWP Thermal Conductivity ASTM E1530-11 0.27 W/mk Thermal Resistance ASTM E1530-11 7.13E-2 m2k/w Service Temperature -20 to 60 degree Celcius Alderon FWP being of hollow and triple walled construction is of good thermal (and sound) insulating properties. Above are tested sample data of insulating and conducting properties for comparison with other walls
and panels.The service temperature range of Alderon FWP is -20°C to 60 °C, greater care should be taken when working with UPVC Sheet at lower temperatures; UPVC is less resistant to impact damage at temperatures below zero
Celsius. - + Flammability
-
Flammability
Alderon FWP is self-extinguishing without external flame source and conforms with the highest ratings for plastic and composite materials. Under UL94 Flammability Test, Alderon FWP classified as V-0 low flammability.
- + Physical & Mechanical Properties
-
Physical & Mechanical Properties
Test Method Product Alderon FWP Tensile Strength at Yield ASTM D-638 30 Mpa Elongation at Yield ASTM D-638 15% Hardness ASTM D-2240 79 Modulus of Elasticity in Bending ASTM D-790 750 When installing Alderon FWP, horizontal supporting beams should be applied for every 1500 mm – 1800 mm of height and vertical beam for approximately 2000 mm span width.
Please take note that mechanical strength would reduce over time if exposed to sunlight and chemicals, and it is recommended after some years (depending on the location environment) that inspections be carried out
re the structural integrity of the panels. - + Corrosion and Chemical Resistance
-
Corrosion and Chemical Resistance
Test Method Product Alderon FWP Sulphuric Acid 40% 60 degree Celcius 168 hours ASTM D543-06 No Change Nitric Acid 40% 60 degree Celcius 168 hours ASTM D543-06 No Change Ammonia Gas room temperature 168 hours ASTM D543-06 No Change Alderon FWP has good chemical resistance to a wide range of chemicals , acids and bases, especially rubber processing chemicals, paper making chemicals, animal and waste farms methane & ammonia gas/vapour,
fertilizer chemicals, galvanizing fumes etc. - + Installation Process
-
Installation Process
Click image to enlarge - Install the cladding module to the structure using roofing screws.
- Attach the second cladding module from male to female with the tongue & groove system.
- Repeat the step to install the next module.
| Effective Width | 1000 mm |
| Weight | 5.7 Kg/Lm |
| Flat Thickness | 20 mm |
Some examples of Alderon FFB uses :
- Decking panels for Mezzanine flooring.
- Racking System planks.
- Portable floor Panel for temporary structures
- Poultry barns and broiler units flooring.
- Animal husbandry barrier/wall panels.
| Temperature Difference | 60⁰C outer side, 33⁰C on inner side |
Alderon FFB’s unique hollow construction comes with built-in thermal insulation properties, which will help to reduce heat transfer to the living space, and vice versa. The service temperature range of Alderon FFB is -20°C to 60 °C, greater care should be taken when working with Vinyl Sheet at lower temperatures; UPVC is less resistant to impact damage at lower temperature.
| Test Method | Product Alderon FFB | |
| Tensile Strength at Yield | ASTM D-638 | 30 Mpa |
| Elongation at Yield | ASTM D-638 | 15% |
| Hardness | ASTM D-2240 | 79 |
| Modulus of Elasticity in Bending | ASTM D-790 | 750 |
| Crush Test F Max | 3281 N | |
| 3-Point Bending Test F Max (N)/15 cm Width | 1205 N |
When delivered new Alderon FFB uPVC Floor can be stepped on when installing with supporting steel beam span of around 500 mm. However for safety concern, the installer must evaluate based on above mechanical properties calculation versus weight of workers per area. Please kindly note that mechanical strength would reduce over time and it is not recommended after some years (depending on the location environment) that workers walk beyond beam supports when inspecting or working on Alderon FFB.
Alderon FFB is self-extinguishing without external flame source and conforms with the highest ratings for plastic and composite roofing material. Under UL94 Flammability Test, Alderon FFB classified as V-0 low flammability.
| Test Method | Product Alderon FFB | |
| Sulphuric Acid 40% 60 degree Celcius 168 hours | ASTM D543-06 | No Change |
| Nitric Acid 40% 60 degree Celcius 168 hours | ASTM D543-06 | No Change |
| Ammonia Gas room temperature 168 hours | ASTM D543-06 | No Change |
Alderon Flat Wall Panel
Get complete information about specifications and features of Alderon Flat Wall Panel
GET ALDERON FLAT WALL PANEL
CONTACT US
Alderon
Altira Office Tower 37th Floor
Altira Business Park
Jl. Yos Sudarso Kav. 85
Jakarta 14350 - Indonesia
| Phone | : +6221 2188 2099 / 2001 |
| Fax | : +6221 2188 2098 / 2021 |
| : cs@impack-pratama.com |
